Showing posts with label Super Car. Show all posts
Showing posts with label Super Car. Show all posts

Saturday, September 3, 2011

2012 Audi A5 DTM Concept at the Frankfurt Auto Show

Audi presents the new A5 DTM
* World debut at the International Motor Show (IAA) in Frankfurt
* Testing of the new DTM vehicle has begun
* Reduction of costs by up to 40 percent
On the eve of the International Motor Show (IAA) in Frankfurt Audi presented its new DTM vehicle: After the V8 quattro (1990 to 1992) and the A4 (2004 to 2011) the brand with the four rings has opted to use a two-door coupe in the most popular international touring car series for the first time.

The new Audi A5 DTM, which bears the internal project name “R17″ at Audi Sport, conforms to the new Technical Regulations that will come into effect in the 2012 season. The project was premised on three key aims: the safety of the vehicles, reduction of the costs by up to 40 percent and a spectacular exterior design.
IAA visitors will have the opportunity to get a first-hand impression of the new car’s look at the Audi Hall from September 13th to 25th. The Audi A5 DTM appears lower and sturdier than its successful predecessor with which Audi has won four of the last seven DTM titles. Underneath the body, which is completely made of carbon, a new type of chassis features a hybrid construction. The combination of a carbon fiber monocoque and steel cage sets new standards in terms of safety for a race touring car. In addition, the chassis is one of more than 50 components which are identical for all DTM vehicles.

“Due to these shared components it was possible to achieve the cost reduction target of up to 40 percent without compromising on the safety and attractiveness of the DTM vehicles,” explains Head of Audi Motorsport Dr. Wolfgang Ullrich, who has been in charge of the new Audi A5 DTM development.
The A5 DTM is 5.01 meters long, 1.95 meters wide and 1.15 meters low. The wheelbase of all DTM vehicles is identical, i.e. 2,750 millimeters. Like its predecessor, the A5 DTM is powered by a V8 engine with an output of about 340 kW (460 HP). The six-speed transmission, now pneumatically operated using paddle shifters in the steering wheel, is a new development. The shifting events are more precise compared with conventional manual gearshifts and allow the mileage of the unit to be quadrupled to up to 24,000 kilometers.
The engine electronics (Bosch MS 5.1), which operate without fuses, and the central display that is already being used in the Audi R8 LMS are state-of-the-art as well. The exclusive tire partner Hankook is supplying larger and wider tires with dimensions resembling those of LMP2 sports cars.
A safety fuel tank with a capacity of 120 liters is integrated with the carbon fiber cell of the Audi A5 DTM. It would allow the current distance of a DTM race to be covered without a refueling stop. For longer races a quick refueling system is in development.

The engine sub-frame at the front and the transmission at the rear are identical for all DTM cars and limit the freedom of the engineers with respect to the suspension, which has to be mounted to these shared components. In addition, steel as the material for the A-arms and the tube dimensions are specified. For the hub carrier, the regulations define the material and the production process to be used. A milled aluminum part with a minimum weight is prescribed. Furthermore, a strict provision in the regulations defines the wheel hubs and the rims for all entrants.

The possibilities in the area of aerodynamics are restricted as well. Air flow through the body, as in the case of the current A4 DTM, and complex additional wings at the rear are no longer allowed. This creates a stronger visual resemblance between the race car and the production model. At the same time the new DTM vehicles are to respond less sensitively to body contact with other vehicles and deliver slipstream improvements – also thanks to the larger rear wing.

“In the past, Audi has had very innovative solutions particularly in the area of aerodynamics in the DTM,” says Dr. Martin Mühlmeier, Head of Engineering at Audi Sport. “Since these areas have been subjected to severe restrictions good detailed solutions will now be crucial to achieving advantages over the competition.”

The “R17″ project was launched in May 2010 and a month later the decision was made that the A5 would serve as the base model. Trials in the model wind tunnel have been run since February 2011. The roll-out was successfully performed on July 29, 2011 by Martin Tomczyk. Since then testing of the A5 DTM has been in progress. The homologation of the A5 DTM is scheduled for March 1, 2012 – until then the engineers at Audi Sport in Ingolstadt and Neckarsulm still have time to fine-tune the detailed solutions.

2012 Audi A5 DTM Concept - Front Angle Speed
2012 Audi A5 DTM Concept - Front And Side Speed
2012 Audi A5 DTM Concept - Front Speed
2012 Audi A5 DTM - Front And Side

Friday, June 10, 2011

2011 LEXUS LFA SUPERCAR PICTURE

Lexus LFA
The heart in my throat, butterflies in the stomach, legs soft. Unmistakable symptoms of lightning. The Lexus LFA is a blow of emotions that overwhelm you as very, very few other supercars can do today. The Japanese-built cars of the mark, we had the real privilege to try on the road, it takes just to let the stone, but a lot to come out of your memories.

Lexus LFA

Indelible as the most powerful experiences, the Lexus LFA is betting everything on the emotional factor and its exclusivity. Only 500 (all already sold) will be produced. And only three examples of pre-production around the world are used for test printing. The car that we had to hand in these days in the setting of Forte dei Marmi, is the only available for European journalists. Never before has a LFA had arrived in Italy.

Lexus LFA

2011 LEXUS LFA SUPERCAR

The mark Lexus of course not be summed up in the capital while Lexus LFA. Its values ​​are many and are expressed in the various products that make up the 2011 range, all present at our meeting with the house in Tuscany. We have tried it two in addition to the supercar: the IS-F and IS 250C.

Tuesday, May 10, 2011

FERRARI 458 ITALIAN ZEUS OF PROJECT SR

ferrari 458 fire
Make a preparation for a Supercar the likes of Ferrari 458 Italy is never a simple undertaking. Yet, we believe, the end processing proposed by SR Project could find a lot of supporters among those who want to make only his Ferrari at least more than it already is. The "Zeus" is based on alloy rims 20 "and 21" inches respectively to the front axle and front to back.
This package is called the Zeus project involving tuner based in Vancouver. What else if not Novitec, they provide additional aerodynamic kits to 458. Kit includes front lip spoiler, side skirts, rear skirt, rear lip spoiler and a black gloss roof.

ferrari 458 fire

They are manufactured by Forged Pointed satinanti and are colored black, combined with the colors chosen for the roof of the car. Are placed outside a front lip spoiler, side skirts, airfoil and top made ​​from tuner Novitec . From this derives the system lowered springs. The exhaust gases can flow better but thanks to the Akrapovic dedicated.

ferrari 458 fire
With additional contributions from European tuners are Akropovic. Are contributing to a new exhaust system, which allows the addition of 458 Italian to this. Although Project SR not want to say about this. For the wheel is the result of Forgiato Aguzzo tuner with 21 inches in front and 22 inches behind a leg of 458. Do not miss Novitec also lowered and the spring suspension tuning in this 458 Italy.