Showing posts with label lamborghini. Show all posts
Showing posts with label lamborghini. Show all posts

Monday, September 19, 2011

Lamborghini Reventon Roadster

Lamborghini Reventon Roadster Front Angle View
With Mercedes and McLaren battling for supercar supremacy at the Frankfurt Motor Show, the long-rumored Lamborghini Reventón Roadster had become a bit of an afterthought – until now.
Lamborghini Reventon Roadster Rear Angle View
Lamborghini Reventon Roadster Side Angle View
Lamborghini Reventon Roadster Interior View
Like the original Reventón coupe, which debuted in Frankfurt two years ago, the roadster redefines style, elegance, and insanity. Designed to be a stealth fighter for the road, the Reventón boasts jet-inspired carbon fiber body panels and aggressive 18-inch wheels. Inside, the roadster is decked out in alcantara upholstery and carbon fiber trim.

While details are limited, the roadster will likely be powered by a 6.5-liter V12 engine with 650 HP (478 kW) and 660 Nm (487 lb-ft) of torque. Backed up by a six-speed e-gear transmission and standard all-wheel drive, the Reventón will accelerate from 0 to 100 km/h in just 3.4 seconds. If you keep your foot planted, the roadster will top out somewhere in the neighborhood of 340 km/h (211 mph).

Friday, September 2, 2011

2012 Arrinera Supercar

2012 Arrinera - Front And Side Open Doors
Arrinera Automotive has officially launched the car in the segment “supercar”
Arrinera will be a Polish-British car in the “supercar” segment, which in terms of driving parameters, quality of workmanship and performance can compete with the cars manufactured by the most renowned companies in this market segment. Work on the prototype has been completed and the project is entering the crucial phase of preparing a manufacturing/production version of the car
Arrinera’s design assumptions aim at fulfilling all the following conditions, which distinguish a ”super car” from mass-produced sports cars:
  • extraordinarily almost-perfect traction throughout the speed range,
  • brake deceleration of 1,1-1,3 g (10,79-12,75 m/s²),
  • power/weight ratio of 1,1-2,9 kg/1HP,
  • acceleration 0 – 200 km/h below 10 seconds,
  • acceleration 0 – 300 km/h below 30 seconds,
  • acceleration to 100 km/h below 4 seconds,
  • braking from 300 to 0 km/h below 7 seconds,
  • the 0-300-0 km/h test below 40 seconds,
  • cornering g-force over 1 ,
  • 1/4 mile time below 12 seconds,
  • centrally positioned engine,
Lee Noble, a famous British car designer will lend his name to the project. He is currently a member of the supervisory board and a shareholder in Arrinera Automotive S.A. He will be responsible for technical aspects related to the supercar as well as for the design and production of the rolling chassis. Completion of work on the prototype means that the project now enters into the crucial phase of preparing a manufacturing/production version of the car which will take at least 12 months – typical for conditions connected with the production of cars in the ”supercar” segment
Lee Noble is a British entrepreneur, designer and automobile engineer. He has been acclaimed as the most prolific British car manufacturer ever. Across three decades, he has manufactured almost 2000 cars based on his own designs. Almost all of them produced innovative performance, sometimes at the expense of comfort and flashy styling. The first of them – Ultima – was used as a test mule for a model which was to become the fastest production car in the world – the McLaren F1.
As part of implementing its strategy, the management of Arrinera Automotive has signed an exclusive deal for negotiations to buy a 50% stake in Fenix Automotive Ltd from Great Britain, which is involved in the construction project of the Fenix sports car. Arrinera plans to complete the transaction by the end of the third quarter of 2011. This investment will enable Arrinera to carry out the strategy for building a group of companies with a very strong position in the world market of low-volume production in the ”supercar” and sports car segments, gaining access to foreign markets and technology/know-how while operating in a prestigious and elite market. Fenix Automotive is controlled by Lee Noble.
Arrinera Automotive plans to commence production of cars in Poland. Instead of creating its own manufacturing facilities, the company is concentrating on finding suitable subcontractors in our country and talks with potential partners having necessary expertise in car manufacturing are well advanced.
The next step in the execution of the company’s strategy is to begin work on a new car – this time in the “fun car” segment. It is a single- or two seat car, fully open without luggage space, weighing less than 500 kg and power in the range of 200-300 HP. Its price should not exceed 70,000 GBP
Arrinera Automotive expects the target volume of production of all three models will be from 600-700 cars a year.
Arrinera Automotive S.A. is preparing for its first quotation of shares at the New Connect market. The majority shareholder of Arrinera Automotive is the VENO S.A. venture capital fund, listed on the New Connect market for 3 years.
Appearance of Arrinera
The car body styling is characterized by sharp and dynamic lines, which clearly indicate the massive potential of the supercar. The front of the car is close to the ground which vastly improves its aerodynamic properties. Two air intakes allow cooling air to be directed onto the hot brakes. When looking at the car from the side, one cannot help the impression that the car is surprisingly asymmetrical: the passenger cabin is moved forwards and the door line rises distinctively – these features are something that we do not see very often in everyday traffic. Such a futuristic car body is the result of the central positioning of the massive engine, which dominates the whole design. At the back of the car, unique muffler housings with diffusers resemble the exhaust nozzles of a jet airplane. The Arrinera supercar will be equipped with a 650HP engine. The car body will be unique and its aerodynamics and lightweight construction will make it possible to maximize the output of the engine. The stylist responsible for Arrinera’s lines is Pavlo Burkatskyy.
Chassis and body
The chassis designed by Lee Noble will be made from high-strength steel of variable section and considerable torsional strength. It will be extraordinarily light and characterized by high deformation resistance. The expertise of the British designer (over 30 years in the industry) ensures a suitable level of protection for the cars in this category. Optionally, the body, interior and floor can be made of Carbon/Kevlar fiber composite materials.
Interior
Individual elements will be made of high quality leather and composite materials. The car is equipped with an audio system, electric windows and mirrors and air conditioning. For safety reasons – in case of a rollover – reinforced roll bars have been positioned behind the seats and both seats are equipped with 4-point seat belts.
Engine
An 8-cylinder 6.2-litre engine with a maximum power of 650HP and 820 Nm torque.
Wheels
19-inch wheels create additional space for an expanded braking system. Light-alloy wheels
with 255/35 R19 tyres (front) and 335/30 R19 (rear).
Brakes
Front wheels are equipped with 6-piston callipers and 380 mm brake discs. Rear wheels with 4-piston callipers and 350 mm brake discs.
Suspension
Independent, multi-link, optimized for high speed cornering.
Night vision camera
The car can be fitted with a night vision camera option, which monitors the area in front of the car at the distance of a few hundred metres. If the camera detects an object with a temperature exceeding the ambient temperature (presumably an animal or a human), the driver can see a bright and clear image of this object on a display located in the central console within normal sight line. This may significantly improve the safety level at night and when driving in fog as compared to xenon headlights.
Dimensions and projected technical specifications of the final version
  • Length (mm): 4450
  • Width (mm): 2056
  • Height (mm): 1190
  • Wheel track front (mm): 1594
  • Wheel track rear (mm): 1744
  • Wheelbase (mm): 2695
  • Engine capacity (l): 6.2
  • Engine: V8
  • Power (HP): 650
  • Maximum torque (Nm): 820
  • Gearbox: Graziano
  • Weight (kg): 1300
  • Weight/power (kg/1 HP): 2.0
  • 0-100 km/h: 3.2
  • 0-200 km/h: 8.9
  • 0-200-0 km (s): 14.3
  • 200-0 km/h (m): 133
  • 1/4 mile time (s): 11.0
  • Max. speed. km/h : 340
  • G force in curves (g): 1.3
  • Price : from 100,000 GBP
2012 Arrinera - Side Angle Open Doors
2012 Arrinera Supercar - Carbon Fiber
2012 Arrinera - Carbon Fiber
2012 Arrinera Supercar-Carbon Fiber
2012 Arrinera - Dashboard
2012 Arrinera - Interior
2012 Arrinera - Front Angle Speed
2012 Arrinera - Front Angle
2012 Arrinera - Front Low View
2012 Arrinera - Front
2012 Arrinera - Headlights
2012 Arrinera - Rear Angle
2012 Arrinera - Rear Section
2012 Arrinera - Rear Side
2012 Arrinera - Rear
2012 Arrinera - Side Angle
2012 Arrinera - Side
2012 Arrinera Supercar - Rear Angle


Wednesday, May 25, 2011

2011 Lamborghini Gallardo Superleggera HQ car models gallery and specification

2011 Lamborghini Gallardo Superleggera HQ car models gallery and specification
Lamborghini Gallardo Superleggera HQ PicturesLamborghini Gallardo Superleggera HQ PicturesLamborghini Gallardo Superleggera HQ PicturesLamborghini Gallardo Superleggera HQ PicturesLamborghini Gallardo Superleggera HQ Pictures

Friday, May 20, 2011

2011 Lamborghini Diablo car specification and wallpapers

2011 Lamborghini Diablo car specification and wallpapers
2011 Lamborghini Diablo2011 Lamborghini Diablo

Thursday, April 14, 2011

2011 LEXUS IS250 WHEELS MODEL PICTURE

2011 is250 Little known here, this daring Lexus IS250 received a simple customization but that completely changed his look outside. Among the key changes, the Lexus IS250 received a set of 20 "wheels Vossen Wheels's model Matte Black Machined VVSCV1 in measures 20 x 9 in front and 20 × 10.5 in the back.

lexus is
The wheels are highlighted by the low height of its body, obtained through a suspension Buffers sports Megan LP Series. Moreover, the final touch in bold Lexus IS250 is up to the painting of his body in Celeste, coming from Lamborghini.

Saturday, March 19, 2011

Lamborghini to add new models, Gallardo replacement and Estoque on cards

Lamborghini Estoque

Lamborgini Murcielago has been replaced by the Aventador LP700-4. The new Lamborghini supercar was launched at Geneva this year & was a hit. All Lamborgini Aventadors have been sold for this year. Lamborghini might not just stop with the Aventador in fact, the Sant’ Agata factory might produce a whole new range of supercars with the ranging bull logo on them.



Lambo Sesto Elemento 
The Sesto Elemento is just a concept car. an Aventador roadster seems quite possible. As tradition goes, the company is known to bring out a roadster version of their cars later. The Murcielago also had a roadster version and a lighter Super Veloce.

Lamborghini Aventador
Via Torquenews

Wednesday, October 13, 2010

PARIS MOTOR SHOW 2010: Lamborghini & Callaway Collaborate





Lamborghini and Callaway, the American maker of high-end golf clubs, jointly develop a new form of carbon fiber--"forged composite"--that will be used first on a new Callaway driver and later in a future Lamborghini automobile.
Today at the 2010 Paris Motor Show, Lamborghini not only unveiled its wild Sesto Elemento concept car but also announced its new partnership with Callaway, the American golf-club manufacturer, to produce a new form of carbon fiber. Lamborghini President and CEO Stephan Winkelmann and George Fellows, President and CEO, Callaway Golf, inked the deal right on the Lamborghini stage in front of the assembled media.

Afterward, we spoke with Tim Buckman, senior director of global communications for California-based Callaway as well as Alan Hocknell, an expatriate Brit who is Callaway's senior vice president of R&D, about their collaboration with Lamborghini. Why Lamborghini? I asked. Was this just because you wanted an excuse to drive hot Italian exotics? Hocknell chuckled and then explained:

"Our goal in developing forged composite was to be able to retain the strength, lightness, and low density of traditional carbon fiber, enhance that, but also have a more precise forming process so we can form shapes that the precise amount of strength and weight in the areas that we need it, and not the areas where we don't.

"When you start with a laminate carbon fiber material, it starts out as a flat sheet, and it doesn't really like to bend into a three-dimensional form, so forming complex shapes is actually quite difficult; and this is actually the same issue that the folks at Lamborghini have in making the structural elements of a car: they are complex three-dimensional shapes, and they want to form those very precisely for the same reasons of having strength and weight where they need it and not where they don't. The opportunity is compatible.

"We had to learn about the material before we could apply it to any product. It was our efforts to characterize the material; to understand how it behaves in the forging process; to understand what its strengths were. If the fibers were all randomly arranged, could we rely on that random arrangement to be strong in all directions all the time? Questions like that. We used some lab facilities at the University of Washington in Seattle and the folks from Lamborghini were interested in using the same lab facilities to do some similar work. It was at that point that our paths crossed.

"The guys at Lamborghini realized that we had been working in that area for maybe about four years now, so we had already gathered some experience in how the material behaves in different forming process parameters....that knowledge we brought to them, and

"We have a driver product that launches within the next month. The crown, top surface, this entire top piece of the driver is made of the new forged composite material, which makes it substantially lighter. We can do a number of things: we can take weight out of the overall head, which allows us to make the club longer, so people swing with higher head speed, which translates to more ball speed, more distance. But we only really want to do that if we can retain all the other performance properties of the head, even if we make the head lighter. So we are improving the power-to-weight ratio in the head by using this material.

"The driver is called the Diablo Octane Black and will cost $299 in the U.S. It's quite accessible, bringing multi-material technology into a price that people normally associate with single material, like titanium.

"This is effectively an omnidirectional material. The randomness of the fibers is something we've had to look at statistically to ensure that when they're allowed to flow randomly in the matrix to this location....in the case of the driver, you're looking right through the paint at the material: every one of these drivers is going to be unique; it's going to have a different random arrangement of fibers from the next one; visually they will be subtly different. It's like technology meets art. We've done the homework on understanding the strength distribution; that it can be random, yet strong in all directions.


"It's significantly better than laminate carbon fiber. The investment is slightly different in that the tooling required to form these precise final shapes is more expensive, but the cycle time is lower, so you need fewer replicates of the same tool. So, overall, the economies are there potentially. We're still at the beginning of that journey."

Thursday, March 4, 2010

Lamborghini Gallardo L 570-4

Latest super car from Lamborghini Gallardo series, is the successor of the first generation in 2007.







Saturday, December 12, 2009

Lamborghini Gallardo LP600-4